Grain protectants build barrier against storage pests
Author: Ellen McNamara | Date: 21 Dec 2016
Growers planning to store grain in unsealed storages after this year’s harvest are being encouraged to consider using grain protectants to reduce the risk of insect pest infestations.
“It’s a common misunderstanding, but research shows us that grain protectants work best to protect grain where there is no pest infestation. There is no guarantee a protectant will kill existing pests,” Dr Daglish said.
“To give your protectant its best chance of working, grain should be clean and pest free and should be applied quickly after harvest when this is most likely. The longer grain is stored the more chance that you will have a pest problem.
“Like all aspects of grain storage, the decision to use a protectant must be researched, planned and implemented to a specific timeframe.”
This point is particularly important in reference to markets, with Dr Daglish saying growers need to know whether or not protectant will be accepted at sale.
“Generally speaking protectants are only registered for use on cereal grains and of those only some protectant products are registered for use on malting barley, rice and maize. No protectants are registered for use on pulses and oilseeds.
“Growers need to have a buyer secured, and know what that buyer will or won’t accept as part of their planning process.”
He says there are few options available to growers to control storage pests when an infestation is detected.
“Phosphine, sold in the solid formulation of aluminum phosphide (AIP) under trade names such as phostoxin® and fumitoxin®, is by far the most common disinfestation treatment for stored grain,” he said.
“However, the label was first written in the 1970s for relatively small silos and other storages. Now a significant number of northern growers have invested in large capacity (1500 tonne) flat bottom silos, so trials were needed to see if current label rates would work in these larger storages.
“It is also incredibly important that growers have a silo that is sealable to the Australian standard, or fumigation simply won’t work.”
Another option for reducing the likelihood of grain pests is aerating stored grain from when it goes into storage.
“Cooling grain below 20°C dramatically reduces grain insect population growth. Experience shows that to get the best results, the aeration fans should be turned on from when you first start loading the bin.
“This allows the aeration system to exploit the evaporative cooling effect of any moisture that may be in the freshly harvested grain.
“Where grain is already dry, it is still valuable to utilise cooling aeration as it removes the 'harvest heat' from grain that is often 30 to 35°C going into the silo, due to the daytime temperatures during wheat and barley harvest.”
Some protectants start deteriorating 48 hours after being mixed with water so growers should avoid leaving prepared protectants for long periods before applying to grain. The product label will also indicate the anticipated effective life of the protectant on the grain.
The effective life of protectants may be shortened if applied to grain above 12 per cent moisture content and at temperatures above 27°C, or if treated grain is exposed to direct sunlight which can occur at the end of a shed or in an open bunker.
Further information on grain protectants is available from the GRDC’s Stored Grain Information Hub and can be found via this link.The GRDC’s Stored Grain National Information Hotline is also available to help growers with all their grain storage investments and practices. By phoning 1800 WEEVIL (1800 933 845) growers will be put in contact with their nearest grain storage specialist.
To support growers with their on-farm grain storage preparations, the GRDC has released a Stored Grain app for iPhones and iPads. It can be downloaded for free from the iTunes store, or via this link.
Sarah Jeffrey, Cox Inall Communications
0418 152 859