Results

221. Fully-matching results

222. 15.4 Weight and balance requirements

     https://grdc.com.au/resources-and-publications/grownotes/technical-manuals/spray-application-manual/spraying-system-components-and-set-up/module-15-weight,-balance-and-tyres/15.4-weight-and-balance-requirements
     • Cached
     • Explore

     24 Jan 2025: Top. To determine the most appropriate tyres and inflation pressures the operator needs to know the weight of the tractor with linkage (including nose tank if fitted) or with the trailing sprayer connected. Steps to check the weight and balance of a

     a:

     Grains Research and Development Corporation

     b:

     Grains Research and Development Corporation

     Date:

     2025-01-24 14:40:42, 2025-01-24 14:40:42, 2024-12-03, 2025-01-24

     e:

     15.4 weight and balance requirements, summary

     f:

     text/html

     H:

     212fa1f13e545cb316505fa6c2bd95f4

     j:

     https://grdc.com.au

     l:

     https://grdc.com.au/__data/assets/image/0038/375887/brandmark_landscape.png

     issueno:

     15.4 Weight and balance requirements

     title:

     15.4 Weight and balance requirements

     p:

     Grains Research and Development Corporation

     aissueno:

     Module 15: Weight, balance and tyres

     thumbfocus:

     thumb-focus-center

     ctype:

     GrowNotes

223. 15.3 Establishing the sprayer's weight per axle

     https://grdc.com.au/resources-and-publications/grownotes/technical-manuals/spray-application-manual/spraying-system-components-and-set-up/module-15-weight,-balance-and-tyres/15.3-establishing-the-sprayers-weight-per-axle
     • Cached
     • Explore

     24 Jan 2025: Top. Before attempting to establish the sprayer’s weight per axle (load per tyre), the spray operator should measure and record the current tyre pressures using a calibrated tyre air pressure gauge. Tip. Make sure the gauge is accurate. Take your

     a:

     Grains Research and Development Corporation

     b:

     Grains Research and Development Corporation

     Date:

     2025-01-24 14:40:42, 2025-01-24 14:40:42, 2024-12-03, 2025-01-24

     e:

     15.3 establishing the sprayer's weight per axle, summary

     f:

     text/html

     H:

     338000a61a73ff831cd3bba212f6e728

     j:

     https://grdc.com.au

     l:

     https://grdc.com.au/__data/assets/image/0038/375887/brandmark_landscape.png

     issueno:

     15.3 Establishing the sprayer's weight per axle

     title:

     15.3 Establishing the sprayer's weight per axle

     p:

     Grains Research and Development Corporation

     aissueno:

     Module 15: Weight, balance and tyres

     thumbfocus:

     thumb-focus-center

     ctype:

     GrowNotes

224. 15.2 Terminology for tyre specifications

     https://grdc.com.au/resources-and-publications/grownotes/technical-manuals/spray-application-manual/spraying-system-components-and-set-up/module-15-weight,-balance-and-tyres/15.2-terminology-for-tyre-specifications
     • Cached
     • Explore

     24 Jan 2025: Top. Every tyre has a lot of information stamped on the side wall. The information stamped on the rim (generally stamped near the valve stem, sometimes hard to find because of paint) is very important also, as tyre manufacturers technical

     a:

     Grains Research and Development Corporation

     b:

     Grains Research and Development Corporation

     Date:

     2025-01-24 14:40:42, 2025-01-24 14:40:42, 2024-12-03, 2025-01-24

     e:

     15.2 terminology for tyre specifications, summary

     f:

     text/html

     H:

     b0aed6f2919486278b2d586621ff7fc7

     j:

     https://grdc.com.au

     l:

     https://grdc.com.au/__data/assets/image/0038/375887/brandmark_landscape.png

     issueno:

     15.2 Terminology for tyre specifications

     title:

     15.2 Terminology for tyre specifications

     p:

     Grains Research and Development Corporation

     aissueno:

     Module 15: Weight, balance and tyres

     thumbfocus:

     thumb-focus-center

     ctype:

     GrowNotes

225. 14.7: Nozzle design and position on boom

     https://grdc.com.au/resources-and-publications/grownotes/technical-manuals/spray-application-manual/spraying-system-components-and-set-up/module-14-boom-stability-and-height-control/14.7-nozzle-design-and-position-on-boom
     • Cached
     • Explore

     24 Jan 2025: Top. Careful consideration needs to be given to the types of nozzles and the nozzle spacing that the operator may wish to use on the boom before they make a purchase. The position of the spray line and nozzle bodies in relation to the structural

     a:

     Grains Research and Development Corporation

     b:

     Grains Research and Development Corporation

     Date:

     2025-01-24 14:40:40, 2025-01-24 14:40:40, 2024-12-02, 2025-01-24

     e:

     14.7: nozzle design and position on boom, summary

     f:

     text/html

     H:

     62ea9efcd1680edbc7b2e67778da242d

     j:

     https://grdc.com.au

     l:

     https://grdc.com.au/__data/assets/image/0038/375887/brandmark_landscape.png

     issueno:

     14.7: Nozzle design and position on boom

     title:

     14.7: Nozzle design and position on boom

     p:

     Grains Research and Development Corporation

     aissueno:

     Module 14: Boom stability and height control

     thumbfocus:

     thumb-focus-center

     ctype:

     GrowNotes

226. 14.6: Boom-folding options

     https://grdc.com.au/resources-and-publications/grownotes/technical-manuals/spray-application-manual/spraying-system-components-and-set-up/module-14-boom-stability-and-height-control/14.6-boom-folding-options
     • Cached
     • Explore

     24 Jan 2025: Top. Many boom manufacturers offer either bi-fold or tri-fold options to the spray operator when ordering wider booms. The main reason to consider various folding options for the boom would be to match the width of the centre section of the boom to

     a:

     Grains Research and Development Corporation

     b:

     Grains Research and Development Corporation

     Date:

     2025-01-24 14:40:40, 2025-01-24 14:40:40, 2024-12-02, 2025-01-24

     e:

     14.6: boom-folding options, summary

     f:

     text/html

     H:

     194cc11e845f6f3262535c915b1606ba

     j:

     https://grdc.com.au

     l:

     https://grdc.com.au/__data/assets/image/0038/375887/brandmark_landscape.png

     issueno:

     14.6: Boom-folding options

     title:

     14.6: Boom-folding options

     p:

     Grains Research and Development Corporation

     aissueno:

     Module 14: Boom stability and height control

     thumbfocus:

     thumb-focus-center

     ctype:

     GrowNotes

227. 14.5: A comparison of front-mounted booms with rear-mounted booms

     https://grdc.com.au/resources-and-publications/grownotes/technical-manuals/spray-application-manual/spraying-system-components-and-set-up/module-14-boom-stability-and-height-control/14.5-a-comparison-of-front-mounted-booms-with-rear-mounted-booms
     • Cached
     • Explore

     24 Jan 2025: Top. There are both potential benefits and some limitations to having a front-mounted boom in comparison to a rear-mounted boom. Most spray operators are familiar with the operation and limitations of a rear-mounted boom, so the following discussion

     a:

     Grains Research and Development Corporation

     b:

     Grains Research and Development Corporation

     Date:

     2025-01-24 14:40:39, 2025-01-24 14:40:39, 2024-12-02, 2025-01-24

     e:

     14.5: a comparison of front-mounted booms with rear-mounted booms, summary

     f:

     text/html

     H:

     583e2bd85119104d6a5ae57c6890788d

     j:

     https://grdc.com.au

     l:

     https://grdc.com.au/__data/assets/image/0038/375887/brandmark_landscape.png

     issueno:

     14.5: A comparison of front-mounted booms with rear-mounted booms

     title:

     14.5: A comparison of front-mounted booms with rear-mounted booms

     p:

     Grains Research and Development Corporation

     aissueno:

     Module 14: Boom stability and height control

     thumbfocus:

     thumb-focus-center

     ctype:

     GrowNotes

228. 14.4: Systems for maintaining boom height

     https://grdc.com.au/resources-and-publications/grownotes/technical-manuals/spray-application-manual/spraying-system-components-and-set-up/module-14-boom-stability-and-height-control/14.4-systems-for-maintaining-boom-height
     • Cached
     • Explore

     24 Jan 2025: Top. Any height-control system fitted to the sprayer must be compatible with the boom centre and the terrain on which the operator intends to conduct spraying operations. Maintaining optimum nozzle height can be helped by rigid touchdown wheels,

     a:

     Grains Research and Development Corporation

     b:

     Grains Research and Development Corporation

     Date:

     2025-01-24 14:40:39, 2025-01-24 14:40:39, 2024-12-02, 2025-01-24

     e:

     14.4: systems for maintaining boom height, summary

     f:

     text/html

     H:

     a5a05229323dc46a45d3e40451344ca5

     j:

     https://grdc.com.au

     l:

     https://grdc.com.au/__data/assets/image/0038/375887/brandmark_landscape.png

     issueno:

     14.4: Systems for maintaining boom height

     title:

     14.4: Systems for maintaining boom height

     p:

     Grains Research and Development Corporation

     aissueno:

     Module 14: Boom stability and height control

     thumbfocus:

     thumb-focus-center

     ctype:

     GrowNotes

229. 14.3: Boom centre design and functions

     https://grdc.com.au/resources-and-publications/grownotes/technical-manuals/spray-application-manual/spraying-system-components-and-set-up/module-14-boom-stability-and-height-control/14.3-boom-centre-design-and-functions
     • Cached
     • Explore

     24 Jan 2025: Top. There are a range of boom centres that are employed on modern sprayers. These include rigid, pendulum, trapeze, inverted trapeze, and a combination of pendulum and trapeze. Boom-stability-rigid-boom-centres. 8 January 2025. Boom stability -

     a:

     Grains Research and Development Corporation

     b:

     Grains Research and Development Corporation

     Date:

     2025-01-24 14:40:39, 2025-01-24 14:40:39, 2024-12-02, 2025-01-24

     e:

     14.3: boom centre design and functions, summary

     f:

     text/html

     H:

     e07bba25f609c27e91ec387117b421fc

     j:

     https://grdc.com.au

     l:

     https://grdc.com.au/__data/assets/image/0038/375887/brandmark_landscape.png

     issueno:

     14.3: Boom centre design and functions

     title:

     14.3: Boom centre design and functions

     p:

     Grains Research and Development Corporation

     aissueno:

     Module 14: Boom stability and height control

     thumbfocus:

     thumb-focus-center

     ctype:

     GrowNotes

230. 14.2: Importance of nozzle height

     https://grdc.com.au/resources-and-publications/grownotes/technical-manuals/spray-application-manual/spraying-system-components-and-set-up/module-14-boom-stability-and-height-control/14.2-importance-of-nozzle-height
     • Cached
     • Explore

     24 Jan 2025: Top. For broadacre boom spraying, the boom is normally fitted with nozzles that produce a tapered flat fan spray pattern and are designed to be operated with a double overlap of each spray pattern to achieve a uniform spray deposit across the width

     a:

     Grains Research and Development Corporation

     b:

     Grains Research and Development Corporation

     Date:

     2025-01-24 14:40:39, 2025-01-24 14:40:39, 2024-12-02, 2025-01-24

     e:

     14.2: importance of nozzle height, summary

     f:

     text/html

     H:

     925b5517ff5b2b66355b4c584b583c40

     j:

     https://grdc.com.au

     l:

     https://grdc.com.au/__data/assets/image/0038/375887/brandmark_landscape.png

     issueno:

     14.2: Importance of nozzle height

     title:

     14.2: Importance of nozzle height

     p:

     Grains Research and Development Corporation

     aissueno:

     Module 14: Boom stability and height control

     thumbfocus:

     thumb-focus-center

     ctype:

     GrowNotes

231. 13.6: Display outputs

     https://grdc.com.au/resources-and-publications/grownotes/technical-manuals/spray-application-manual/spraying-system-components-and-set-up/module-13-rate-controller-functions-and-settings/13.6-display-outputs
     • Cached
     • Explore

     24 Jan 2025: Top. It is possible to have a lot of information displayed on the main screen, such as speed, litres per hectare, nozzle pressure, tank volume and hectares sprayed. But litres per minute and nozzle pressure are the most important pieces of

     a:

     Grains Research and Development Corporation

     b:

     Grains Research and Development Corporation

     Date:

     2025-01-24 14:40:32, 2025-01-24 14:40:32, 2024-11-06, 2025-01-24

     e:

     13.6: display outputs, summary

     f:

     text/html

     H:

     2fefab2b9bac92b4c1af80e2016c9141

     j:

     https://grdc.com.au

     l:

     https://grdc.com.au/__data/assets/image/0038/375887/brandmark_landscape.png

     issueno:

     13.6: Display outputs

     title:

     13.6: Display outputs

     p:

     Grains Research and Development Corporation

     aissueno:

     Module 13: Rate-controller functions and settings

     thumbfocus:

     thumb-focus-center

     ctype:

     GrowNotes